Useful in the field! Tips for repairing a part of concrete chip

  • This time, I will explain in a little more detail how to make a foundation for small concrete repairs.

 

Before

First of all, the other parts that are likely to be chipRemove with a hammer etc.Remove dust with a Wire Brush or electric blower.


* Point *
 If there is dust or dirt on the adhesive surface,Be careful as it can easily come off.

 

 

Apply primer,"Repair Resin" or resin mortar rather than the finished surface serve a little higher.

* Point *
 It is an image of intentionally trowel-coating it high and scraping it after hardening to align the surface.
This gives a flatter and more beautiful surface.
So it is not necessary to apply it neatly at the trowel-coating stage,It is a waste of time to hold it down with a trowel many times.

 

 

When hardening begins and the surface of the Repair Resin becomes whitishScrape off excess material with a scraper.


* Point *
 If the repair is wide or if resin mortar is usedIt is better to grind it with a grinder.

 

 

After completely drying, it gives a gloss feeling and blurs the border line.Apply C Repair Lining once or twice.

After drying, remove excess lining materialRemove with a scraper or # 600 paperEliminate boundaries as much as possible.


* Point *
 The part with the lining and the part without it
By erasing the border ofWhen spray C Repair Color , the border line will not come out.

The groundwork should be sprayed as thinly as possibleIt is an important point to make.

 

 

 

Repeat the C Repair Color repeat color when the base is completedspray,It is OK if the background disappears and the base color matches.

Rub the whole with # 600 paper to give it a gloss feel.

After that, add a pattern to copy the surrounding pattern,If you feel comfortable with it, you're done.

 

After

 

This time, the report focuses on the points up to the groundwork.

This is common to other honeycomb and difference in level repairs, so I hope you find it useful.


Next time, I will post the points of spray and pattern.

 

 

 

The materials used this time that can be purchased at our shop

-------------------------------------------------- -------------------------------------------------- ----------------------

At a Concrete Repair Shop, We sell tools and materials that can be used for partial repair of concrete.

 

In addition, a simple concrete repair method that anyone can do is also open to the public!

 

Even in the video, we are opening useful information on site such as various repair methods related to concrete!