How to flatten repair areas using a scraper
A method of scraping the repair material"Repair Resin" that can be sharpened and shaped using a scraper to create corners and flat surfaces. If the repaired part is not completely flattened with the skeleton, the seams will be visible even if the colors are matched, and the repaired part will be conspicuous. Let's get the knack for shaping the repaired part that is the base.
Optimal Grinding Timing for "Repair Resin"
・Repair material that can be sharpened and shaped
・ Compare the timing of shaving the "Repair Resin" by time. How to make good use of repair material that can be sharpened and shaped.
-If it is not completely flattening, the subsequent processes such as "glazing/ C Repair Lining" and "color matching/ C Repair Color" will not work well.
Materials to prepare
Scraper
How to use
① Check if the material is a little hardening.
(Note that it is not hardening at all, or it cannot be scraped if it is completely hardening.)
② Let's scrape in parallel from the surface little by little.
Ideally, the hardness should be moderately sharpened.
③ After scraping to some extent, scrape while touching both ends of the blade against the concrete surface.
(Be careful not to let the blade get into the repaired part)
④ If there is no unevenness and it is flat, it is complete.
Repair Resin (each color, each number)