(1) Trowel-coating a thin coat of water or primer so that it covers the repaired part and the part where you want to make it gloss .
* Install after the water and primer are slightly drained.

(2) Place an appropriate amount of C Repair Lining and extend it with a Metal trowel for lining material .
Let's stretch it thinly so as to hold it down.
(The base is transparent)
When it dries, lightly rub it with Paper # 600.

③ If you want to make it gloss, rub it with the back of the paper or a waste cloth to make it gloss.

④ Finally, wipe off the dust with a waste cloth and you're done.