How to Create Patterned Formwork Joints on Concrete
- Using Repair Resin, you can easily add formwork joint that have disappeared during repairs.
■ Materials to prepare
Repair Resin, sand, water, Rubber Bowl, knead trowel, trowel-coating trowel, masking tape
■ How to use
First, apply masking tape on both sides of the area where you want to create the joint (leaving a space the width of the joint).
Apply primer to the areas where you will be making joints.
trowel-coating Repair Resin mixed with a small amount of sand in a heaping motion.
Remove the masking tape before the Repair Resindries completely .
At this time, peel the tape outwards to achieve a neat finish.
Adjust the height and texture by changing the amount of Repair Resin applied and the aggregate mixed in.
Once the material is dry, it's done.
Materials to prepare
How to use
(1) Apply masking tape on both sides of the place where you want to make joints (leaving the width of the joints).
② Apply a primer to the place where you want to make joints.
trowel-coating a small amount of sand or silica sand with Repair Resin on a plate .
③ Peel off the curing tape before the Repair Resin is completely dry.
At this time, peel off the tape toward the outside for a beautiful finish.
④ Adjust the height and texture by adjusting the amount of Repair Resin applied and the aggregate to be mixed.
When the ingredients are dry, you're done.
Repair Resin (each color, each number)
Cationic substrate adjustment primer "Royal W21"
Rubber Bowl