How to use C Repair Color color matching concrete colors
・ For finishing partial repair marks. For color matching and stain removal.
・ Repeat thinly spraying on partially repaired parts and dirty parts → drying → spraying thinly for a natural finish.
How to spray C Repair Color well
・ It is a video that erases the rust color well using C Repair Color.
How to spray C Repair Color color matching of the repaired area
・ Basic spraying method
・ How to eliminate the different color of the repaired part using C Repair Color
Materials to prepare
How to use
① Fill the spray gun with C Repair Color.
② First, spray a little and check the color.
If the colors do not match, adjust with Tone Color or # 7 white.
③ When the color is close to the surroundings, do not spray only on the repaired part, but spray it on the whole so as to blur the surroundings.
Be sure to dry it and blow it up little by little.
④ If you feel the color is heavy, rub it lightly with # 600 paper.
⑤ Finally, wipe off the dust that has been scraped off with a waste cloth.
* Basically, no primer is required before spraying C Repair Color.
Spray directly spray the Repair Resin or C Repair Lining .
C Repair Color 450ml (Each color separately) 
C Repair Color 450ml 7 colors set
Tone Color (black, yellow, red)