Treatment of dense pin holes
↑ Fixing Dense Concrete Pinholes : Guide for Flawless Results
-This is a video that easily repairs dense pin holes using the " Repair Resin " products of fast-curing polymer system cement repair material .
・ C Repair Lining
・ C Repair Color
・ Tone Color
・ Repair Resin
・ Rubber Bowl
・ Wagner FLEXIO
・ Pattern Pad
・ Level Grinding Wheel # 80
STEP1
Moisten the repaired area with water and knead the Repair Resin softly.
STEP2
Trowel-coating at once with a Metal trowel for intermediate trowel-coating.
At this time, it is difficult for the material to penetrate deep into the pin holes at one time, so trowel-coating it by stuffing it with a trowel .
STEP3
Before the Repair Resin dries, scrape off excess material with a scraper to expose the concrete surface.
When using a grinder, let it hardening completely before shaving.
* In the photo, a grinder with a grindstone # 80 is used.
STEP4
Scrape off excess material such as shavings with # 600 paper.
It is complete when there is no discomfort with the surroundings.
* If color matching is required, go to ⑤. * Trowel-coating lining material depending on the condition of the base.
STEP5
Spray the paint that matches the surrounding color.
Let's blow it over while drying it little by little.
completion
Add a pattern as needed and you're done.
State before construction
What you can buy at our shop
-
C Repair Color (each color separately)
-
C Repair Color (7colors set)
-
Tone Color (Black, Yellow, Red)
-
Repair Resin (each color, each number)
-
C Repair Lining
-
Rubber Bowl
-
Cationic substrate adjustment primer "Royal W21" -
Pattern Pad (Large / Small)
-
Wagner Flexio 570 Electric Spray Gun
-
Level Grinding Wheel # 36 # 80