Roughly remove the curing material such as injection equipment and quick mender,
Polishing and flattening the surface with "Level Grinding Wheel # 36"

Trowel-coating " Repair Resin " on the whole, and when it is half- hardening, scrape it with a scraper to flattening it.

Allow it to hardening completely and then rub it with # 600 paper

Lightly moisten the surface with a Brush or the like, and apply a thin coat of "C Repair Lining" as a whole.
After it is completely dried, apply # 600 paper to remove excess material and let it blend in around the edges.

* The surface will become smooth, and the color will become more familiar with the surroundings in the subsequent process.
* Do not use if the surface is rough.

Let's spray "C Repair Color". Be sure to blow once thinly ⇒ dry ⇒ blow thinly ⇒ dry and repeat many times.
On the way, lightly rub it with # 600 paper and let it blend in.
It is OK if the background disappears to some extent and the base color becomes familiar with the surroundings.

* Select a color that is as close as possible, and then use "Tone Color" to make fine adjustments.

Prepare several colors of "Tone Color " diluted with water, and add a concrete pattern with " Pattern Pad".

Instead of trying to apply them all at once, gradually create pattern from light colors.

The crack repair marks are no longer visible.
Even if it is hit by rain, it will be wet as well as the surroundings, so it will not be noticeable.